How to Make Weed Lollipops?

If you have a sweet tooth for edibles, weed lollipops provide you with a tasty way to enjoy cannabis. Unlike gummies, such suckers offer a lasting experience as the cannabinoids absorb slowly through the mouth. Apart from that, these cannabis lollipops play their role in providing a delightful treat with a hint of herbal goodness. 

Want to learn how to make weed lollipops at home? Generally, this task may be easier than you might think, but it requires some patience. Go through these brief instructions at a glance before moving to detailed steps to make such medicinal lollipops at your own home. 

Steps to Make Weed Lollipops:

If you're into homemade edibles, why stop at lollipops? Try your hand at a simple homemade chocolate recipe too. Just like these cannabis lollipops, making chocolate at home gives you full control over ingredients.

Upon getting a concise idea about making weed suckers, dig deeper into this article to explore its detailed recipe. 

Part 1. Ingredients and Equipment to Make Weed Lollipops

Before moving to the detailed steps for this recipe, you need to collect the right equipment to smoothen the making process. Throughout this part, we will introduce you to the ingredients and tools, including PJ Bold’s lollipop molds, to make the process easier for you. 

Main Ingredients

Following are some of the grocery items you need to make the weed lollipop recipe a major success at home. 

• Granulated Sugar: You will need a single cup of this main component of the lollipop for structure and sweetness.
• Light Corn Syrup: Apart from that, a half cup of this syrup will prevent the sugar from crystallizing.
• Filtered Water: While making weed lollipops, you will need around a quarter cup of water to dissolve the sugar and corn syrup.
• Cannabis Tincture: We recommend you add around three tablespoons of this ingredient for infusing CBD into the lollipops.
• Flavoring Extract: To add uniqueness to the flavor, try to add one spoon of different fruits or vanilla extracts.
• Food Coloring: Optionally, you can choose to add coloring syrup to give the weed suckers a vibrant look.

These simple ingredients are the base of a great weed lollipop recipe. When you feel familiar with the method, you can start experimenting with flavor and texture variations. As an example, a Homemade Caramel Lollipop is an awesome alternative if you enjoy a creamier, buttery flavor.

Equipment to Make Weed Lollipops

Once you collect all the ingredients, gather the tools given below to make your favorite lollipops at home. 

• Saucepan: You will need this tool to heat and combine the ingredients.
• Candy Thermometer: To avoid overheating, this equipment is essential for monitoring the temperature to reach the hard crack stage.
• Lollipop Molds: As this is the most important requirement, we recommend you choose the best possible brand. For this, buy weed lollipops mold from the PJ Bold collection to shape them in the best way possible.
• Lollipop Sticks: Try to make use of the best sticks to give a handle for the suckers.
• Measuring Cups: When looking to avoid any miscalculations, utilize such tools for accurate ingredient portions.

Once you have your silicone lollipop molds prepared, be sure to know how to use silicone molds correctly, pour carefully, don't overfill, and leave them alone till they're completely set for the best results.

After completing this checklist, it is time to move to the next phase of the lollipop-making task. Go through the following section to learn how to make weed lollipops at home.

Part 2. What Are the Steps to Make Weed Lollipops?

Throughout this process, you will be working with high temperature and cannabis tincture, so follow each step carefully. This detailed breakdown will make sure your weed lollipops turn out delicious. 

Step 1. Gather Your Ingredients and Equipment

As mentioned, collect some ingredients and equipment before starting cooking. To cross-check you haven’t missed anything, go through the table given below. 

If you’re planning to add a chocolate layer or drizzle to your weed lollipops, it’s a good idea to know how to melt chocolate the right way to keep the texture smooth and easy to work with.

Step 2. Prepare the Lollipop Molds

While choosing the weed suckers mold, you need to choose the best one to shape and set your cannabis-infused candy. For the best results, we recommend using the PJ Bold silicone molds. The following properties make this mold a great success. 

• Durable and food-safe silicone
• Non-stick properties 
• Well-defined shapes 
• Withstand high temperatures without warping

After you're finished with this step, make sure that you understand how to properly clean silicone molds so that they're in good condition for future batches and don't have any remaining residue.

After picking the best molds, place them on a flat surface to prevent spills or uneven cooling. Next, you have to insert the lollipop sticks into the designated slots. 

Step 3. Make the Candy Mixture

Once the mold is set up, proceed to make the candy mixture for your weed lollipops. For this, combine the ingredients pasted below in a saucepan over medium heat. 

• 1 cup granulated sugar
• ½ cup light corn syrup
• ¼ cup filtered water

After adding these ingredients, stir the mixture using a rubber spatula until the sugar becomes dissolved.

With the addition of chocolate later on, slight variations in preparation can make the flavor even better. Understanding how to make chocolate taste stronger can be helpful, particularly when combining it with sweeteners such as corn syrup and sugar.

Step 4. Heat to the Hard Crack Stage

While making the candy mixture for weed suckers, we suggest you attach a thermometer to the saucepan. Moving forward, you have to allow the mixture to boil without stirring.

When the temperature reaches 260°F, simply add a few drops of food coloring. Now, continue heating until the mixture reaches up to 300°F known as the hard crack stage.

Step 5. Add Flavoring and Cannabis Tincture

Upon heating the mixture to the limit, now remove the candy syrup from the heat. To make these cannabis lollipops and weed gummies tastier, pour the following ingredients. 

• Approximately half a teaspoon of flavoring extract, such as fruit or vanilla
• Around three tablespoons of cannabis tincture

After adding these ingredients while following the weed lollipop’s recipe, stir gently to distribute the cannabis evenly. 

Step 6. Pour the Mixture into Molds and Let it Cool

Now, you have to act quickly, as the candy mixture will start hardening within minutes. Proceed to carefully pour the hot mixture into the prepared lollipop molds. We recommend you utilize PJ Bold for this purpose because it follows food safety standards. 

Upon properly positioning weed lollipop sticks, let them sit at room temperature for at least an hour until completely hardened. You can learn about the utility of these PJ Bold silicone molds to make this whole process easier. 

Things You Need to Know Before Making Weed Lollipops

Before you start making such lollipops, try to understand the legal aspects and proper dosage control practices given below.

1. Legal Considerations: Follow Local Cannabis Laws

Cannabis laws vary from place to place, so make sure yoU Check your state or country’s regulations on cannabis use and edibles. While there are many myths around weed lollipops, these points will try to solve your confusion.

• Understand THC limits for homemade edibles in legal regions
• Comply with age restrictions
• Never distribute or sell edibles illegally, as penalties can be severe

2. Dosage Control Practices

As we know, CBD tends to affect everyone differently, so controlling the dose in each lollipop proves to be crucial. Follow these guidelines to optimize the dosage for your weed suckers.

• Start with a low dose, especially if you’re new to edibles.
• You have to understand the delayed effects, as these lollipops take 60-90 minutes to kick in.

3. Labeling the Weed Suckers

After learning how to make weed lollipops, you need to label them properly to prevent accidental consumption. While doing so, we recommend you clearly mark suckers and include dosage details, such as “Contains 5 mg THC per lollipop.” 

Flavoring and Customization Ideas for Weed Lollipops

Take guidance from the given tips to make your weed suckers even more exciting with unique flavors and fun edible decorations. 

1. Experiment with Flavor Extracts

Thanks to the fruit extracts like strawberry or mango, you can add a fruity twist to your lollipop. You can even try the vanilla or caramel extracts for a rich taste. 

2. Use Quality Molds

As mentioned before, food enthusiasts need to invest in PJ Bold lollipop molds while making suckers. Using such food-grade molds, you will be able to create eye-catching weed lollipops at home.

3. Decorate with Edible Toppings

To make your lollipops sparkle, add edible glitter or sugar crystals before they harden. 

Keeping in view all these instructions and best practices, improve the way you mold weed suckers after going through the next section. 

Part 3. How Do You Mold and Set Perfect Lollipops?

Throughout this article, we have tried to help you recognize the importance of quality molds to follow weed lollipop recipes. For this purpose, we recommend you use molds offered by PJ Bold, as they specialize in premium silicone lollipop equipment. 

Other than fixed tools, they also offer custom mold-making for branding your cannabis edibles. No matter if you’re making lollipops or chocolates, PJ Bold has molds for every cooking need. After acquiring the best mold, go through the steps below to optimize this lollipop-making process. 

Step 1. Pour Mixture into Mold

Start this task by carefully pouring your CBD candy mixture into the cleaned mold. While doing so, utilize PJ Bold molds to prevent spillage and allow for uniform thickness. 

Step 2. Place Sticks into the PJ Bold Molds

After pouring the mixture, immediately place the sticks into the dedicated slots in your PJ Bold mold. These molds are designed with built-in stick holders to keep them in place during storage and consumption.

Step 3. Let the Lollipops Cool Down

Once you place the sticks, leave your weed lollipops at room temperature for about an hour. Once fully hardened, simply pop the lollipops out of the mold. Thanks to PJ Bold’s non-stick silicone, you won’t struggle with breakage or sticking. 

Once you have learned how to make weed lollipops and gummies using PJ Bold, take guidance from the following safety tips.

Part 4. What are the Safety and Consumption Tips for Weed Lollipops?

Unlike smoking, weed edibles take longer to kick in, so their effects last much longer. Consider the following points to dose weed suckers properly in an attempt to prevent overconsumption and unwanted side effects.

• If you’re new to such lollipops, begin with the dose under 5 mg of CBD per lollipop to gauge your tolerance.
• When adding THC to your lollipop mixture, measure everything accurately to ensure each candy has an even dose.
• You need to understand the effects timeline, as weed suckers can take 30 to 90 minutes to start working. 

Troubleshooting Common Issues

Even with the best ingredients and tools, things can go wrong when making weed lollipops. Go through these common problems and how to fix them with ease. 

Issue 1. Lollipops Are Too Soft or Sticky

You can face this issue when the candy doesn't reach the proper temperature and hard crack stage. To avoid this issue, you have to use a candy thermometer to heat the mixture to the correct temperature before pouring it into PJ Bold molds.

Issue 2. Sugar Crystallizes or Becomes Grainy

When you stir the mixture too much, it can cause sugar to crystallize. We suggest you avoid excessive stirring after the mixture starts boiling and use light corn syrup.

Issue 3. Lollipops Stick to the Mold

Occasionally, your weed suckers can stick to the molds if they aren't prepared properly. As a solution, we recommend you use PJ Bold non-stick silicone molds and lightly grease them if needed. 

Conclusion

When you follow all the instructions, making weed suckers at home turns out to be a rewarding experience. To make the process even smoother, select quality ingredients and the best equipment, like PJ Bold's silicone molds.

All of this will help you create perfectly shaped and quality cannabis lollipops. While learning how to make weed lollipops with these molds, make doses responsibly and store them away from children. 

Frequently Asked Questions

Q1. Can I make weed lollipops without a candy thermometer?

Absolutely, you can make weed lollipops without a candy thermometer, requiring extra attention. While doing so, we recommend you apply the cold water test to make sure the syrup reaches the correct consistency.

Q2. How long do weed lollipops stay potent?

Generally speaking, most of the weed suckers stay potent for over twelve months when stored properly. For this, you have to keep them in an airtight container to prevent THC degradation. 

Q3. Is it possible to use CBD instead of THC?

Yes, you get to use CBD tincture in its place to make these weed lollipops. While using this recipe, substitute oil in the recipe to ensure proper dosage for desired effects.