How to Make Weed Lollipops?

Want to learn how to make weed lollipops at home? Generally, this task may be easier than you might think, but it requires some patience. Just collect the right ingredients and equipment to start making these cannabis lollipops. 

Within just six simple steps, get yourself a great tipsy treat by mixing weed tincture in a candy base. However, you need to get the procedure right to obtain the texture and taste you want. That’s where we come in, as we will provide all the information you will need to make these medicinal lollipops at your own home. 

Brief Instructions to Make Weed Lollipops at Home

If you're into homemade edibles, why stop at lollipops? Try your hand at a simple homemade chocolate recipe, too. Just like these cannabis lollipops, making chocolate at home gives you full control over the ingredients.

Part 1. Ingredients and Equipment to Make Weed Lollipops

Before moving to the detailed steps for this recipe, you need to collect the right equipment and ingredients to smoothen the making process. 

Main Ingredients to Make Weed Lollipops

• Granulated Sugar: You will need a single cup of this main component of the lollipop for structure and sweetness.
• Light Corn Syrup: A half cup of this syrup will prevent the sugar from crystallizing.
• Filtered Water: While making weed lollipops, add around a quarter cup of water to dissolve the sugar and corn syrup.
• Cannabis Tincture: Add approximately three tablespoons of this ingredient for infusing CBD into the lollipops.
  
• Flavoring Extract: For unique taste, add one spoon of different fruits or vanilla extracts.
• Food Coloring: Optionally, choose to add coloring syrup to give the weed suckers a vibrant look.
  

These simple ingredients are the base of a great weed lollipop recipe. When you feel familiar with the method, you can start experimenting with flavor and texture variations. As an example, a Homemade Caramel Lollipop is an awesome alternative if you enjoy a creamier, buttery flavor.

Equipment to Make Weed Lollipops

• Saucepan: Needed to heat and combine the ingredients.
• Candy Thermometer: To avoid overheating, this equipment monitors the temperature to reach the hard crack stage.
• Lollipop Molds: As this is the most important requirement, choose the best possible brand. For this, buy weed lollipops mold from the PJ Bold collection to shape them in the best way possible.
• Lollipop Sticks: Try to make use of the best sticks to give a handle for the suckers.
• Measuring Cups: When looking to avoid any miscalculations, utilize these tools for accurate ingredient portions.

Once you have your silicone lollipop molds prepared, be sure to know how to use silicone molds correctly, pour carefully, don't overfill, and leave them alone till they're completely set for the best results.

Part 2. What Are the Steps to Make Weed Lollipops?

Throughout this process, you will be working with high temperature and cannabis tincture, so follow each step carefully. This detailed breakdown will make sure your weed lollipops turn out delicious. 

Step 1. Gather Your Ingredients and Equipment

To cross-check you haven’t missed anything, go through the table given below. 

If you’re planning to add a chocolate layer or drizzle to your weed lollipops, it’s a good idea to know how to melt chocolate the right way to keep the texture smooth and easy to work with.

Step 2. Prepare the Lollipop Molds

Choose the best weed suckers mold to shape and set your cannabis-infused candy. For the best results, utilize the PJ Bold silicone molds. The following properties make this mold a great success. 

• Durable and food-safe silicone
• Non-stick properties 
• Well-defined shapes 
• Withstand high temperatures without warping

After you're finished with this step, make sure that you understand how to properly clean silicone molds so that they're in good condition for future batches and don't have any remaining residue.

Now, place these molds on a flat surface to prevent spills or uneven cooling. Next, insert the lollipop sticks into the designated slots. 

Step 3. Make the Candy Mixture

Proceed to make the candy mixture for your weed lollipops. For this, combine the ingredients pasted below in a saucepan over medium heat. 

• 1 cup granulated sugar
• ½ cup light corn syrup
• ¼ cup filtered water

Afterward, stir the mixture using a rubber spatula until the sugar is dissolved. 

With the addition of chocolate later on, slight variations in preparation can make the flavor even better. Understanding how to make chocolate taste stronger can be helpful, particularly when combining it with sweeteners such as corn syrup and sugar.

Step 4. Heat to the Hard Crack Stage

While making the candy mixture for weed suckers, attach a thermometer to the saucepan. Moving forward, allow the mixture to boil without stirring.

When the temperature reaches 260°F, add a few drops of food coloring. Now, continue heating until the mixture reaches up to 300°F known as the hard crack stage.

Step 5. Add Flavoring and Cannabis Tincture

Upon heating the mixture to the limit, now remove the candy syrup from the heat. To make these cannabis lollipops and weed gummies tastier, pour the following ingredients. 

• Approximately half a teaspoon of flavoring extract, such as fruit or vanilla
• Around three tablespoons of cannabis tincture

While following the weed lollipop’s recipe, stir gently to distribute the cannabis evenly. 

Step 6. Pour the Mixture into Molds and Let it Cool

Now, you have to act quickly, as the candy mixture will start hardening within minutes. Proceed to carefully pour the hot mixture into the prepared lollipop molds. Utilize PJ Bold for this purpose because it follows food safety standards. 

After positioning weed lollipop sticks, let them sit at room temperature for at least an hour until completely hardened. 

Things You Need to Know Before Making Weed Lollipops

Before making such lollipops, understand the legal aspects and proper dosage control practices given below.

1. Legal Considerations: Follow Local Cannabis Laws

Cannabis laws vary from place to place, so make sure yoU Check your state or country’s regulations on cannabis use and edibles. While there are many myths around weed lollipops, these points will try to solve your confusion.

• Understand THC limits for homemade edibles in legal regions
• Comply with age restrictions
• Never distribute or sell edibles illegally, as penalties can be severe

2. Dosage Control Practices

As, CBD tends to affect everyone differently, so controlling the dose in each lollipop proves to be crucial. Follow these guidelines to optimize the dosage for your weed suckers.

• Start with a low dose, especially if you’re new to edibles.
• Understand the delayed effects, as these lollipops take 60-90 minutes to kick in.

3. Labeling the Weed Suckers

After learning how to make weed lollipops, label them properly to prevent accidental consumption. While doing so, clearly mark suckers and include dosage details, such as “Contains 5 mg THC per lollipop.” 

Flavoring and Customization Ideas for Weed Lollipops

Take guidance from the given tips to make your weed suckers even more exciting with unique flavors and fun edible decorations. 

1. Experiment with Flavor Extracts

With extracts like strawberry or mango, add a fruity twist to your lollipop. Also, try the vanilla or caramel extracts for a rich taste. 

2. Use Quality Molds

Food enthusiasts need to invest in PJ Bold lollipop molds while making suckers. Using such food-grade molds, you create eye-catching weed lollipops at home.

3. Decorate with Edible Toppings

To make your lollipops sparkle, add edible glitter or sugar crystals before they harden. 

Part 3. How Do You Mold and Set Perfect Lollipops?

While following weed lollipop recipes, use molds offered by PJ Bold, as they specialize in premium silicone lollipop equipment. After acquiring the best mold, go through the steps below to optimize this lollipop-making process. 

Step 1. Pour Mixture into Mold

Start this task by carefully pouring your CBD candy mixture into the cleaned mold. While doing so, prevent spillage and allow for uniform thickness. 

Step 2. Place Sticks into Molds

After pouring, immediately place the sticks into the dedicated slots in your mold. Molds are designed with built-in stick holders to keep them in place during storage.

Step 3. Let the Lollipops Cool Down

Now, leave your weed lollipops at room temperature for about an hour. Once fully hardened, simply pop the lollipops out of the mold. 

Part 4. What are the Safety and Consumption Tips for Weed Lollipops?

Unlike smoking, weed edibles take longer to kick in, so their effects last much longer. Consider the following points to dose weed suckers properly to prevent overconsumption.

• If you’re new to such lollipops, begin with the dose under 5 mg of CBD per lollipop to gauge your tolerance.
• When adding THC to your lollipop mixture, measure everything accurately.
• Try to understand the effects timeline, as weed suckers can take 30 to 90 minutes to start working. 

Troubleshooting Common Issues

Go through these common problems you may face while making  weed lollipops and learn how to fix them with ease. 

Issue 1. Lollipops Are Too Soft or Sticky

You can face this issue when the candy doesn't reach the proper temperature and hard crack stage. To avoid this issue, use a candy thermometer to heat the mixture to the correct temperature.

Issue 2. Sugar Crystallizes or Becomes Grainy

When you stir the mixture too much, it can cause sugar to crystallize. So, avoid excessive stirring after the mixture starts boiling and use light corn syrup.

Issue 3. Lollipops Stick to the Mold

Occasionally, your weed suckers can stick to the molds if they aren't prepared properly. As a solution, use PJ Bold non-stick silicone molds and lightly grease them if needed. 

Conclusion

When you follow all the instructions, making weed suckers at home turns out to be a rewarding experience. To make the process even smoother, select quality ingredients and the best equipment, like PJ Bold's silicone molds.

All of this will help you create perfectly shaped and quality cannabis lollipops. While learning how to make weed lollipops with these molds, make doses responsibly and store them away from children. 

Frequently Asked Questions

Can I Make Weed Lollipops Without a Candy Thermometer?

Absolutely, you can make weed lollipops without a candy thermometer, requiring extra attention. While doing so, apply the cold water test to make sure the syrup reaches the correct consistency.

How Long Do Weed Lollipops Stay Potent?

Generally, most weed suckers stay potent for over twelve months when stored properly. For this, keep them in an airtight container to prevent THC degradation. 

Is It Possible to Use Cbd Instead of Thc?

Yes, you can use CBD tincture in its place to make these weed lollipops. While using this recipe, substitute oil in the recipe to ensure proper dosage for desired effects.